69

Section 17-69 Specifications required in addition to those on preliminary plat.

The final plat shall conform to and meet the specifications of the preliminary plat, with the following additions: The final plat shall be clearly and legibly shown on a permanent transparency at a scale not smaller than one hundred (100) feet to one (1) inch. Sheet sizes shall be 18 x 24 inches, and where more than one (1) sheet is required an index map shall be required. The final plat shall show:

(1) Bearings and distances to the nearest existing street lines or bench marks or other permanent monuments shall be accurately described on the plat.

(2) Exact boundary lines of the tract, determined by a field survey, giving distances to the nearest one-tenth foot and angles to the nearest minute, which shall be balanced and closed with an error of closure not to exceed one to three thousand.

(3) Name of subdivision, exact locations, right angle widths and names of all streets within and immediately adjoining the platted area.

(4) Street centerlines showing angles of deflection, angles of intersection, radii, and lengths of tangents.

(5) Lot lines with dimensions to the nearest one-tenth foot and bearings.

(6) Lots numbered in numerical order and blocks lettered alphabetically.

(7) Location, dimensions, and purposes of any easements and any areas to be reserved or dedicated for public use.

(8) Accurate location, material, and description of monuments and markers.

(9) A statement either directly on the plat or in an identified attached document, of any private covenants.

(10) That all improvements required by sections 17-186 through 17-189 of this chapter have been provided and meet with the approval of the city engineer.

(11) The following certifications:

a. Surveyor’s Certification, directly on the final plat as follows:

"It is hereby certified that this plat is true and correct and was prepared from an actual survey of the property by me or under my supervision that all monuments shown hereon actually exist or are marked as ‘Future’, and their location, size, type and material are correctly shown and that all surveying requirements of the Land Subdivision Ordinance of the City of Thomasville, Georgia, have been fully complied with.

"By:

Registered Georgia Land Surveyor No.

b. An Owner’s Certification, directly on the final plat, as follows:

"Owner’s Certification:

State of Georgia, County of Thomas

"The owner of the land shown on this plat and whose name is subscribed hereto, in person or through a duly authorized agent, certifies that all state, city and county taxes or other assessments now due on this land have been paid.

"Agent

Date

Owner

Date "

c. Certificate of dedication. A certification by the owner setting forth the description of the areas and improvements he dedicates to the public and the extent of the title which he is dedicating should be attached to the final plat.

d. A certificate of approval of the final plat by the planning commission and the city council, shall be placed directly on the plat as follows:

"Pursuant to the Land Subdivision Ordinance of the City of Thomasville, Georgia, all the requirements of approval having been fulfilled, this Final Plat was given Final Approval by:

"The Thomasville Planning and Zoning Commission on day of ,20 .

Date

Secretary

Thomasville Planning and Zoning Commission

"City Council for the City of Thomasville on day of , 20 .

Date

Clerk"

(Code 1958, 20A-801; Ord. of 2-24-03)

(17-69(11a), Amended, 02/24/2003, Prior Text)